Thermal imaging
FOTRIC Thermal Cameras in Malaysia: Find the Right Model for Your Inspection
At Innovam, we supply FOTRIC thermal cameras in Malaysia, from a compact smartphone attachment and focus-free handhelds to professional cameras for detailed electrical and industrial inspections.
We help match the camera to your asset, viewing distance and reporting needs. Demonstrations, setup and practical training are available depending on the application and agreed scope.
- Check the smallest target from your usual viewing position.
- Compare wide coverage, manual focus and autofocus.
- Confirm how your team will save and report findings.
Tell us what you inspect and we can recommend suitable models.
Model selection
Which FOTRIC thermal camera suits your work?
Start with how you will use the camera. A pocket-sized phone attachment suits quick checks, while handheld options cover broad surveys, focused component checks and autofocus fieldwork. For detailed industrial inspections, we can assess lens options and reporting requirements alongside field conditions.
Portable checks
FOTRIC TP320A-L60
Suited to quick thermal checks when you prefer to capture images on a smartphone.
40 g smartphone attachment · 320 × 240 IR resolution
We can help confirm phone compatibility and whether the workflow fits your inspection.
View model details
FOTRIC TF3-L50
Suited to routine electrical, equipment, HVAC and building checks at relatively close range.
Focus-free · 240 × 320 IR resolution · 38° × 50° field of view
We can compare this quick survey workflow with manual-focus and autofocus options.
View model detailsHandheld inspections
FOTRIC TK6 Kit
Suited to technicians who need to focus on smaller components at varying distances.
Manual focus · 384 × 288 IR resolution · 25° × 19° field of view
We can review your working distance and confirm kit contents before recommending it.
View model details
FOTRIC TK7-L49
Suited to HVAC, building and electrical surveys when you need more of the scene in one frame.
Focus-free · 384 × 288 IR resolution · 49° × 37° field of view
We can compare its wide coverage with the narrower manual-focus TK8 if your target is small or farther away.
View model detailsProfessional industrial inspection
FOTRIC Ti4-L44
Suited to professional field inspections where autofocus can reduce the steps needed to capture an image.
TurboFocus® or manual focus · 320 × 240 IR resolution · 44° × 33° field of view
We can assess whether autofocus is useful at your typical inspection distance.
View model details
FOTRIC V7
Suited to detailed electrical, utility, manufacturing and condition-monitoring inspections.
640 × 480 IR resolution · TurboFocus® or manual focus · interchangeable lens options
We can assess working distance, lens options and reporting needs before recommending a configuration.
View model detailsChoosing between two models? Send us your inspection requirements on WhatsApp so we can compare them for your application.
Inspection applications
What are you inspecting, and what must the camera show?
Target size and inspection distance determine whether a wide, fast survey or a more focused view will be useful. We start with the asset and field conditions so the camera can capture the detail you need from your working position.
Electrical cabinets and utility equipment
Identify the smallest connection you need to document and the safe viewing position set by your site procedures. For detailed images from that position, consider the FOTRIC V7 with interchangeable lens options. We can review whether the target occupies enough of the frame to document a hotspot for follow-up.
HVAC equipment and building surfaces
Decide how much of the unit or surface you need in one frame to see the temperature pattern. The focus-free FOTRIC TF3 suits broad, close-range surveys. We can compare its coverage with the TK7-L49 from the position your team normally works in.
Machinery and manufacturing assets
For repeat inspections, choose consistent viewing positions and decide which annotations your maintenance team needs. The FOTRIC Ti4-L44 with autofocus is an option when an inspection route covers several assets. We can discuss a demonstration to assess image capture and review how the files fit your reporting process.
Technical comparison
Which specifications change the inspection result?
Compare native infrared (IR) resolution, field of view, focus method, useful target distance, temperature range and reporting options. A specification matters when it helps capture or document the target under your working conditions. We can help you compare those trade-offs.
| Inspection need | Relevant specification | What to check on the models | How we help verify the choice |
|---|---|---|---|
| Wide, close-range surveys | Field of view | TF3-L50 covers 38° × 50° and TK7-L49 covers 49° × 37°. Check how the scene fits the frame in the orientation you use. | We compare coverage from your normal working position. |
| Smaller or farther targets | Focus, lens and target distance | Compare TK6 Kit manual focus, Ti4-L44 autofocus and V7 interchangeable lens options for your target. | We review the smallest feature you need to see and the distance from which you can inspect it. |
| Fine image detail | Native IR resolution | The V7 has a 640 × 480 IR detector. Use native detector resolution to compare how much detail each model captures before software enlargement. | We can discuss how much detail the target should occupy in a captured image. |
| Temperature measurement | Measurement range | Check the expected surface temperatures against the ranges provided for each model. | We review your expected operating temperatures and measurement conditions. |
| Reporting and repeat checks | Image files, annotations and software | For the V7 in particular, confirm the image format, measurement markers and analysis software required by your team. | We review your reporting needs and confirm the proposed configuration. |
Need a narrower view than the focus-free TK7? The FOTRIC TK8-L25 offers a 25° × 19° field of view with manual focus.
Selection and setup
How does Innovam help you choose and start using the camera?
We discuss your inspection task, demonstrate a proposed model where applicable, and can support supply, commissioning, user training and after-sales technical assistance. A demonstration can help your team assess the workflow before choosing the equipment.
-
Describe the inspection
Share the asset, smallest target, viewing distance, operating environment and what the inspection or report needs to show.
-
Compare models and arrange a demonstration
We narrow the model choices and, where applicable, arrange a demonstration suited to the task.
-
Confirm, set up and train
Agree on the equipment and support scope, then arrange commissioning and practical training as applicable.
-
Get support after supply
Contact us for technical assistance and to check applicable calibration, service or repair arrangements.
Learn more about how Innovam works from application review through ongoing support.
Local support
Why work with Innovam for FOTRIC thermal imaging?
We combine a range of FOTRIC cameras with application consultation, demonstrations, practical training and local technical support. Your team can compare options against the actual inspection task and agree on the support needed for field use.
Application-led model matching
We review your asset, viewing distance and inspection purpose so you can select a camera that gives you the coverage and detail your team needs.
Practical demonstration and training
Where arranged, users can compare focusing and image capture before selection and get hands-on guidance with the chosen camera.
Support after supply
Our team can help with technical questions and advise on calibration, service or repair options that apply to your equipment.
Frequently asked questions
FOTRIC thermal camera questions in Malaysia
Which FOTRIC model is suitable for electrical inspection?
Match the camera to your target size, safe viewing distance, focus, image detail and reporting needs. We can compare the compact TF3 or a TK-series option with the Ti4-L44 or V7 for more demanding field inspections.
Is a focus-free camera enough for HVAC and building inspections?
A focus-free camera can work well for quick, broad surveys. A smaller target or a different working distance may call for manual focus, autofocus or a different lens. We can assess the scene and compare suitable models.
What is the difference between a thermal camera and an acoustic camera?
A thermal camera shows surface temperature patterns. An acoustic camera helps locate sound sources such as pressurised leaks or certain electrical discharges. We supply both and can help you select the technology that fits the detection task.
Can Innovam demonstrate a FOTRIC camera and train our team?
Yes. We offer application demonstrations and practical training. Share the model, location and training needs so we can discuss a suitable arrangement.
Does Innovam support customers outside Kuala Lumpur?
Yes. We serve customers across Peninsular Malaysia, Sabah and Sarawak. Demonstration, delivery and after-sales arrangements depend on the project. Include your location and application in your WhatsApp inquiry so we can discuss what is available.
Model enquiries
Find the right camera for your inspection
The right FOTRIC thermal camera depends on target size, viewing distance and inspection workflow. We can help you select the equipment and discuss practical support for using it in Malaysia.
Share the asset, viewing distance, location and intended use so we can recommend relevant models.
WhatsApp Innovam about a thermal camera