Underground Utility
Sophisticated Precision for Metallic Utility Tracking
Cable & Pipe Locator
Go to Our Services >>Introduction
Innovam Cable & Pipe Tracer is a sophisticated multi-function cable route tracer engineered for precision and efficiency in underground utility detection. It integrates advanced filtering technologies and robust anti-interference capabilities, making it an essential tool for the accurate location of metallic pipelines, determination of burial depth, and cable identification.
Key Applications
Provides real-time display of cable depth up to 20m and current value.
Features a classic positioning mode, a 360° wire cruise mode, and a signal distortion measurement mode to verify site symmetry.
By calibrating the current direction on partial frequencies, the unit effectively eliminates interference from adjacent lines and prevents tracking errors.
Offers stable and reliable performance with a strong anti-interference ability to suppress power frequency interference.
Features direct output, caliper coupling and induction, with automatic impedance matching and a maximum output power of 15W across 9 adjustable levels.
Product Model
| Receiver Specifications | |
|---|---|
| Function | Pipeline detection (cable position tracking, direction display, depth measurement, current measurement), cable identification, A-frame fault finding* |
| Power Supply | 8.4V rechargeable lithium battery |
| Input Method | Receiver antenna coil, flexible current clamp, A-frame* |
| Receiver Frequency | Active: 640Hz, 1.28kHz, 2.56kHz, 3.2kHz, 4.09kHz, 8.19kHz, 10.2kHz, 32.7kHz, 65.6kHz, 81.9kHz, 197kHz. Passive power: 50Hz, 60Hz, 250Hz. Passive RF: 32.7kHz, 65.6kHz, 81.9kHz, 197kHz. |
| Detection Method | Broad peak method, narrow peak method, null method |
| Pipeline Detection Range | Direct connection: 0–20km; Signal clamp: 0–10km; Induction: buried cables less than 2m depth |
| Depth and Current | Real-time display of cable depth and current value |
| Pipeline Depth Range | 0–20m |
| Depth Accuracy | ±5% at 0–3m burial depth; ±10% at 3–20m burial depth |
| Cable Identification | Flexible current clamp; 1–20 cables can be calibrated; calibration value 75%–135%; transmitter and receiver clamp arrows must face the same direction. |
| Identification Range | Direct connection: 0Ω–8kΩ ground loop resistance, cable length up to 20km. Signal clamp: 0Ω–1kΩ, cable length up to 6km. |
| Display | 4.3-inch LCD touch screen |
| Dimensions | 350 × 155 × 700mm |
| Weight | 2kg |
| Interface | Type-C USB port; aviation socket |
| Operating Temperature | -10℃–40℃; <80%RH |
| Storage Temperature | -10℃–50℃; <60%RH |
| Pressure Resistance | AC2000V/rms |
| Safety Regulations | IEC61010-1 CAT III 600V, IEC61010-031, IEC61326, pollution degree 2 |
| Transmitter Specifications | |
| Function | Multiple frequency signal transmission modes |
| Power Supply | 10.8V rechargeable lithium battery |
| Output Method | Direct connection, signal clamp, induction |
| Output Frequency | 640Hz, 1.28kHz, 2.56kHz, 3.2kHz, 4.09kHz, 8.19kHz, 10.2kHz, 32.7kHz, 65.6kHz, 81.9kHz, 197kHz |
| Output Mode | Automatic accessory identification |
| Output Power | 15W maximum, 9 levels adjustable |
| Impedance | Real-time impedance matching and protection |
| Direct Output Voltage | 150Vpp maximum |
| Circuit Protection | Overload and short-circuit protection |
| Display | 5-inch LCD touch screen |
| Dimensions | 320 × 275 × 145mm |
| Weight | Transmitter: 3.85kg; Signal clamp: 1.2kg |
| DC Charger | DC 11.1V 3A |
| Direct Connect Lead | 3m |
| Signal Clamp Diameter | Ø125mm |
| Connection Interface | USB port, DC port, aviation socket |
| Stress Resistance | Withstands approximately 200kg pressure |
| Pressure Resistance | AC3700V/rms |
| Electromagnetic Properties | IEC61326 (EMC) |
| Safety Regulations | IEC61010-1 (CAT III 300V, CAT IV 150V, pollution degree 2) |
Watch in Action
Innovam supplies cable fault location, underground utility and thermal imaging solutions in Malaysia. We provide training, calibration and technical support.
