Underground utility method selection
Metallic vs Non-Metallic Underground Utility Locators: Which Method Fits Your Site?
Use an electromagnetic (EM) cable locator when the target offers a detectable signal along a conductive line or a suitable tracer. A plastic pipe or non-metallic duct without a traceable element may require a different survey method. Unknown utilities can require more than one method.
For projects in Malaysia, we can assess the MSL-800 for conductive routes, discuss Dual Sense for non-metallic utility applications and arrange a relevant demonstration based on your site and survey objective.
- Identify the utility material and suspected route.
- Check whether a tracer wire or access point is available.
- Review ground conditions and nearby services before choosing a method.
Share the target material, tracer wire or access details, surface and ground conditions, and project location.
Equipment options
Which Innovam option is relevant to your buried utility?
Check for a usable conductive signal path first. If there is one, assess whether an EM trace suits the route. Without a traceable element, assess the non-metallic utility and the site before choosing a method.
Innovam MSL-800 Metallic Cable Locator
Consider the MSL-800 for metallic cables, metallic pipes and usable conductive tracer paths. We can help you choose between direct connection, clamp and induction based on access, site procedures and signal conditions. The receiver displays depth and current indications and supports signal distortion checks.
View MSL-800 product details
Innovam Dual Sense
Discuss Dual Sense when a non-metallic target has no usable conductive route to follow. Before recommending the application, we review the utility material, available records, surface and ground conditions, and what the survey needs to establish.
See Innovam’s civil and land surveying applications for an overview of how the equipment is used.
Tell us what you need to locate so we can recommend an application to demonstrate.
Target and tracer checks
What can an electromagnetic locator trace, and what can it miss?
An EM locator follows a detectable signal along a conductor or traceable element. Utility drawings can help you plan the survey. Confirm the target construction and available signal path before selecting equipment.
Scroll sideways to compare the options.
| Buried target | Likely locating path | What we help determine |
|---|---|---|
| Metallic cable or pipe | Assess an active EM trace or a suitable passive route-tracing setup. | Review MSL-800 signal options, access and interference from adjacent services. |
| PVC or HDPE pipe or duct with tracer wire | Check that the tracer wire exists and has usable continuity. The EM locator follows the wire’s signal. | Assess whether the wire can carry a suitable signal for an MSL-800 trace and how the crew can verify its relationship to the utility. |
| Non-metallic pipe or duct without a usable tracer | Use a survey method suited to a target without a conductive path. | Discuss Dual Sense suitability and whether the site calls for another technique or further verification. |
| Unknown, mixed or crowded corridor | Start with records and site clues, then combine methods as needed and verify uncertain indications. | Review which routes or assets the survey needs to establish before recommending equipment. |
An indicated route or depth can help plan the next check. Follow the site’s physical verification and excavation controls before disturbing the ground.
Electrical status and traceability
Does “live versus dead” mean the same thing as “metallic versus non-metallic”?
Electrical status describes whether the cable is energised. Material and construction determine whether a traceable path exists. A de-energised cable may still be conductive, and a detected live signal still needs target verification.
Conductive and energised
A passive response may help indicate a route. Verify the intended cable and follow qualified site procedures for work around energised equipment.
Conductive and de-energised
A suitable applied signal may allow an EM trace. We can discuss the MSL-800 transmitter options where access and site procedures permit.
Non-metallic with a tracer
A usable tracer can provide a signal path. Check its continuity and whether its route corresponds to the pipe or duct.
Non-metallic without a tracer
Assess an alternative method based on the utility material, ground, surface and survey objective. We can review which application fits those conditions.
Complementary survey methods
When should a project consider GPR or another complementary method?
Consider ground-penetrating radar (GPR) when the survey needs to investigate subsurface features without relying on a conductive signal path. What it can reveal depends on the target, depth, surface and soil. A radar response still needs interpretation to establish what the feature might be.
EM route tracing
Use it to follow a detectable signal along a known conductive path. In congested corridors, check whether the signal may also be present on nearby conductors.
Non-metallic utility investigation
Review the target and site to choose a suitable method. We can discuss the Dual Sense application and identify where another survey technique or further verification should be considered.
Broader subsurface imaging
GPR can help investigate features when records are incomplete or several asset types may be present. Wet, conductive clay can attenuate the radar signal. Reinforcement and closely spaced features can make responses harder to interpret.
Application and equipment support
How does Innovam help you choose and use the right approach?
A useful recommendation starts with the target and the question the survey must answer. We can review the site information, demonstrate relevant equipment and support the crew as it puts the equipment into use.
Review the asset and site
We ask about material, tracer wire, access, nearby services, surface and ground conditions so the proposed method fits the route and survey objective.
Demonstrate the relevant equipment
We can arrange an MSL-800 or Dual Sense application demonstration so your team can assess the workflow and discuss what still needs to be verified on site.
Train and support the team
We support equipment supply and commissioning, provide hands-on training and offer after-sales technical assistance so operators understand the controls, indications and limits of the equipment.
Frequently asked questions about underground utility locating
Can an MSL-800 locate a PVC or HDPE pipe?
The MSL-800 can trace a suitable conductive element associated with the pipe, such as a usable tracer wire. We can help assess whether that signal path is available or whether another application suits the site.
Can a fibre-optic duct be located?
It depends on whether the duct has a traceable element or can be investigated with another suitable survey method. We can review its construction, available records and site conditions before recommending an approach.
Can a cable locator find a de-energised cable?
A de-energised metallic cable may still be traceable with a suitable applied signal when access and site procedures permit. We can discuss an MSL-800 setup and the checks needed to verify the intended cable.
Do I need GPR for every non-metallic utility?
The appropriate method depends on the target and site. We can assess whether the Dual Sense application is relevant and discuss when another survey method or further verification should be considered.
Does clay or a wet site make detection impossible?
Clay and moisture can affect some methods. The effect depends on the ground conditions, target and survey technique. Describe your site so we can discuss an appropriate demonstration or when a complementary method may be needed.
Equipment enquiries
Discuss the locating method for your site
Match the method to the utility material, available signal path and site conditions. We can assess MSL-800 and Dual Sense applications, explain where our underground utility locating equipment fits and discuss demonstration and training arrangements.
Share the asset material, suspected route, tracer wire or access information, ground or surface conditions, and project location in Malaysia.
Discuss your buried utility with Innovam